Sản phẩm
Trang Chủ > Sản phẩm > Máy đục lỗ > Góc Đột đánh dấu cắt dòng > Máy cắt và đục lỗ bằng góc sắt Bangalore
PRODUCT CATEGORIES
Hình thức thanh toán: | L/C,T/T,D/P |
---|---|
Incoterm: | FOB,CFR,CIF,FCA |
Đặt hàng tối thiểu: | 1 Set/Sets |
Thời gian giao hàng: | 30 Ngày |
Thông tin cơ bản
Mẫu số: TAPM1412S
Model No.: TAPM1412S
Performance Classification: High-End CNC Machine Tools
Certification: GS, CE, RoHS, ISO 9001
Condition: New
Trademark: SCM
Transport Package: Sea Transport Packing
HS Code: 8501109101
Color: Optional
Additional Info
Bao bì: Trường hợp bằng gỗ
Năng suất: 300/Y
Thương hiệu: Sunrise CNC
Giao thông vận tải: Ocean
Xuất xứ: Trung Quốc
Cung cấp khả năng: 30set/Month
Giấy chứng nhận: GS, CE, RoHS, ISO 9001
Mã HS: 8459210000
Hải cảng: Qingdao
Mô tả sản phẩm
APM1412S Góc thép đấm Đánh dấu và cắt dây chuyền sản xuất chủ yếu được sử dụng trong kết cấu thép, tháp góc, cầu vv
Chế độ cắt đôi lưỡi và chế độ cắt lưỡi đơn là avaiable, lựa chọn của khách hàng, kỹ sư chuyên nghiệp sẽ thiết kế và đề nghị mô hình suitbale cho bạn.
Processing precision (The allowable tolerance): | ||
1. | Two adjacent hole deviation of the same group | ±0.5mm |
2. | Two not adjacent hole deviation of the same group | ±0.7mm |
3. | Hole deviation of two adjacent group | ±1mm |
4. | Stadia (Distance from central of hole to edge ) | ±0.7mm |
Installation Preparation | |
1. Installation time required for one set CNC angle line: 3-7 days. | |
1.1 The buyer should make ready foundation of machine according to the foundation drawing sent from our side. Please note, the foundation base plates for machine are not supplied by us. The buyer should make them according to drawing requirements. 1.2 Number 46# anti-wearing hydraulic oil, appx. 800L. 1.3 Oil filter is required before infuse oil into hydraulic oil tank. 1.4 Power supply and incoming line should be 50Hz, 380V, three phase. The coming line can be cable or lead wire of 3*102mm. And prepare earth wire of 62mm. 1.5 Air supply is required the air compressor also required for machine. 1.6 Leveling instrument (three legs type). 1.7 Frame level meter. 1.8 Five meter length tape measure. 1.9 Straight rule of 200mm., 1.10 L-square. 1.11 Welding machine for spot weld foundation base plate. 1.12 Traveling crane or moveable forklift. 1.13 Hand drill. 1.14 Three people help to install machine. |
|
2. Commissioning time required: 1-3 days. | |
2.1 Two operators, one maintainer. Arrange some people to accept training. They have to stay with our engineers during installation, commissioning and training. 2.2 Material for testing machine. |
|
3. Training time required: 5 days. | |
It is better that the people who accept training can know computer and electrical knowledge. | |
Remark1:Water Cooling Device If the temperature of oil is too high, density of the oil becomes smaller, and affecting normal operation of machine, and even causing oil leakage, so the oil need cooling device, the best way of cooling for oil is water cooling, client just need to weld one water tank (size about: 2x1.5x1.8m, this size just for reference, picture as below:), when you welded the water tank, buy one pump (Requirements of the pump: power more than 0.5KW, pump head 10m, if bigger it's better, picture for reference as below:) |
|
Water Tank | Water Pump |
Remark2: Air Compressor Device Our machine need air pressure, so in client's factory need the air compressor, for our machine requirements of air compressor: pressure 0.8Mpa, capacity 1m³, it's ok. Picture for reference as below |
|
Remark3: We quote the price not include the Installation, Commissioning and Training. Normally, for angle line need two engineer(Electrical and Mechanical).The buyer shall provide round trip air tickets, suitable accommodation & Airport pickup (boarding, lodging and local transport) to seller's engineers during their service abroad. In addition, the buyer shall pay $50 USD extra per day per person to seller's engineer as technical service fees during their stay at buyer's factory. |
Model | TAPM1412S |
Angle size (mm) | 140*140*12 |
Max. Punching (dia. х thi.) (mm) | Φ26х20 |
Punching force (kN) | 1200 |
Marking force (kN) | 1030 |
Shearing force (kN) | 4300 |
Max. length of blank (m) | 14 |
Max. length of finished (m) | 14 |
Punches per side | 3 |
Group of Marking letters | 4 |
Dimension of letter (mm) | 14×10×19 or 20×12×19 |
CNC axes | 3 |
Shearing mode | Single blade cutting |
Feeding speed of angle (m/min) | 60 |
Programming mode | Lofting software or manual program |
Overall dimensions (mm) | ≈32000×7000×3000 |
Gross Weight of machine (kg) | ≈18000 |
Total power (kW) |
About 4 0 |
Danh mục sản phẩm : Máy đục lỗ > Góc Đột đánh dấu cắt dòng
Gửi yêu cầu thông tin
Ms. Melody
Điện thoại:86-0531-55611277
Fax:86-0531-55611288
Điện thoại di động:+8615563350635
Thư điện tử:melody@sunrisecnc.com
Địa chỉ:No.8299,West of Jingshi rd, Changqing, Jinan, Shandong
Danh sách sản phẩm liên quan
Mobile Site